Resin Bound Driveway install in Hampton

Project Info

  • Construction Date

    July 2017

  • Category

    Driveways & Block Paving

The Beginning


Our customer had a tarmac driveway which had worn quite badly in some areas and was also being affected by roots from a close by tree. They wanted to improve the look of the drive with a Resin Bound overlay.

Work we carried out


After an initial survey it was decided that we would widen the driveway slightly by removing a row of blocks to the left of the drive as you look at the property.

Damaged areas of tarmac were excavated and concreted to give a good solid base and the tree root affecting the drive was removed.

All blocks were lifted and re-laid to give 18-20mm height for the resin overlay.

Golden Pea aggregate 1-3 and 2-5mm was used, bound in UV resistant resin for vehicular traffic.

To finish the installation off, all the blocks were primed and colour fast to improve their look and match the newly installed resin.

As usual the end result has absolutely transformed the property.