Resin Stoned Pathway Garden Makeover

Project Info

  • Construction Date

    April 2017

  • Category

    Driveways & Block Paving, Gardening

The Beginning


Our customers had a front garden that they wanted to makeover and had seen one of our Resin Installations we had carried out elsewhere in Werrington. They Wanted to remove the current, worn out concrete pathway and install a new pathway that would branch out to run around the front of the house and to  the rear garden gate.

They also wanted the garden turfed as the ground was all uneven and just soil and weeds.

Work we carried out


We started by removing the old concrete path and sprayed out a rough design on how the path would look. Once this was decided we went on to hardcore the area, lifting the pathway level up to eliminate a big step down at the garden gate and make the same level as the house reception area.

Edging blocks were then installed and the area concreted. This was then left for a good few days to make sure it had fully cured.

Once we were happy the concrete had cured enough we installed the Resin. The customers had decided on daltex Staffordshire Pink which was laid at 12mm for foot traffic.

The following day we lifted the rest of the garden area with soil, whacker-plated the area down to achieve a good solid base and finished with top soil.

Turf was then laid with instructions to water every evening.

The customers love their new garden which is massively transformed from what it was previously.