The Beginning

The customer wanted to remove a picket fence at the front of the property, replace old fence panels at the side of their driveway and install two new driveway gates.

Work we carried out

We installed new featheredge fencing on concrete posts down the side of the property, two of which we 4ft panels to keep inline with the landlords requirements.

We removed the installed picket fence to improve parking, made and installed two new driveway gates with one set going in a slightly further back location.

The Beginning

Our client based wanted to install some driveways gates to secure the rear area of their property

Work we carried out

We removed the old fence and installed new driveway gates we custom built to their exact requirements

The Beginning

Jennifer has a nice large garden but the current fencing had certainly seen better days and had in places been “modified” to keep in place so Jennifer wanted us to install a nice 6ft Featheredge Fence on Concrete Posts with Concrete Gravel Boards.

Our customer also found the entrance width to their driveway quite narrow and wanted us to advise the most cost efficient way to widen the driveway.

Work we carried out

The old Waney fence panels and metal posts were taken down. As this project was being completed of a number of days we made sure each evening that the garden was secure.

We installed treated Featheredge fence panels on 6″ gravel boards, secured into place with concrete posts. This has greatly increase the security of the rear garden as well as privacy.

With regard to the driveway we have increased the width to 10ft and will be installing a set of driveway gates along with a new single garden gate so the client can keep the driveway gates closed and enter the property via the easier to open garden gate.

This project is due to finish 11th August