The beginning
Our customers had an area outside their recently built property that they wanted to improve the look of as well as create a new place for parking.Work we carried out
For a clean look with minimum maintenance a Resin Bound surface was suggested and to make the install fully SUDS (suburban Urban Drainage) compliant a fully permeable install was completed using a bitumen base. To segregate the area we fabricated and installed new railings and a gate, galvanised and powder coated in black. The install was finished in Daltex Silver hand troweled in UVR Resin.
The beginning
Our customer in March, Cambridgeshire had a concrete driveway they wanted to improve the look of.
Work we carried out
New edging blocks were installed to the perimeter of install area and areas cut back to allow an overlay of 18-20mm of Resin Bound. The old and ugly manhole covers were lifted and reinstalled as recess (camouflaged) covers to keep a nice seamless looking install. A new featheredge gate was constructed and installed and the entire driveway area hand troweled in Golden Pea aggregate bound in UVR resin.
Work we carried out
A new smooth wood picket fence was made along with a gate and painted white.
This was installed in an afternoon at our clients property in Polebrook.
Work we carried out
Installation of new three bar fencing and gate
The Beginning
Our customer wanted to install new driveway gates to their property and had decided on timber as the material for construction.
Work we carried out
The gates were created by ourselves on site and installed in a single day.
Read more about our bespoke gate installations here
The Beginning
Our client had a large paddock area they wanted to fence off with 3 rail fencing and a new gate.
Work we carried out
We installed 110 metres of 3 rail pressure treated fencing and a new gate.
The Beginning
Our clients had some metal railings that were installed as part of the house build in Hampton and wanted a gate to match as closely as possible to the existing railings.
Work we carried out
After an initial visit to take some measurements and images of the existing railings, we fabricated a new gate to match.
The gate was galvanized and powder coated and installed within a couple of weeks.
The customers are over the moon with the finished result.
The Beginning
Our customers wanted us (as part of their new Resin Bound driveway install) to install new electric driveway gates.
Work we carried out
As the property was a listed building we had limited choice in design.
The final install was a hardwood split gate with remote opening.
The Beginning
Our customers wanted to install a picket fence at the front of their property in Bretton.
Work we carried out
We made and installed a 3ft picket fence. The fence was then primed and given three coats of weathershield white paint.