The Beginning
Chris and his partner had a large driveway area with loose gravel which they wanted to improve with block paving.
Work we carried out
The existing gravel was excavated and disposed of.
We installed 12 tonne of MOT Type-1 hardcore to make sure the install had a good strong base and the entire install area was compacted numerous times.
It was decided that grey Tegula blocks in two sizes would be used for the driveway and these were installed and the driveway was again compacted.
Once the area was dry we then covered the install with Kiln dried sand and again compacted the area.
A separate area of the drive (behind the metal gates to the garage) is being completed as a separate Resin Bound project. This will be installed in Daltex Silver to match the Grey Tegula block paving.