Wooden Driveway Gates Made in Peterborough

New Wooden Driveway Gates

The Beginning

Our customer wanted to install new driveway gates to their property and had decided on timber as the material for construction.

Work we carried out

The gates were created by ourselves on site and installed in a single day.

Electric Wooden Gates

Electric Gates in Stamford

The Beginning

Our customers wanted us (as part of their new Resin Bound driveway install) to install new electric driveway gates.

Work we carried out

As the property was a listed building we had limited choice in design. The final install was a hardwood split gate with remote opening.
five bar gate stamford

Five Bar Gates installed in Stamford Peterborough

The Beginning

After installing electric gates at the front of our clients property they asked us to make and install a separate 5 bar gate further into the property grounds of their listed building.

Work we carried out

A hardwood gate was built and installed to existing posts.

Wooden Driveway Gates Made and installed for a client in Peterborough

Install New Wooden Driveway Gates in Eye

The Beginning

The customer wanted to remove a picket fence at the front of the property, replace old fence panels at the side of their driveway and install two new driveway gates.

Work we carried out

We installed new featheredge fencing on concrete posts down the side of the property, two of which we 4ft panels to keep inline with the landlords requirements.

We removed the installed picket fence to improve parking, made and installed two new driveway gates with one set going in a slightly further back location.

Wooden driveway gates installed in Peterborough

Install Driveway Gates

The Beginning

Our client based wanted to install some driveways gates to secure the rear area of their property

Work we carried out

We removed the old fence and installed new driveway gates we custom built to their exact requirements

New fence installed in sallows road, Peterborough

Replace Old Fence, Widen Driveway Entrance and Install New Gates

The Beginning

Jennifer has a nice large garden but the current fencing had certainly seen better days and had in places been “modified” to keep in place so Jennifer wanted us to install a nice 6ft Featheredge Fence on Concrete Posts with Concrete Gravel Boards.

Our customer also found the entrance width to their driveway quite narrow and wanted us to advise the most cost efficient way to widen the driveway.

Work we carried out

The old Waney fence panels and metal posts were taken down. As this project was being completed of a number of days we made sure each evening that the garden was secure.

We installed treated Featheredge fence panels on 6″ gravel boards, secured into place with concrete posts. This has greatly increase the security of the rear garden as well as privacy.

With regard to the driveway we have increased the width to 10ft and will be installing a set of driveway gates along with a new single garden gate so the client can keep the driveway gates closed and enter the property via the easier to open garden gate.

This project is due to finish 11th August