The Beginning

Our customer in Stanground wanted to change his sons driveway as it was in bit of a mess and really liked the idea of a Resin Bound install with no maintenance and in a colour to match his property.

Work we carried out

The entire driveway was excavated and new levels setup.

The area was hardcored with MOT type 1 (important the right type of hardcore is used for any driveway install be it Resin or Block Paving), and the area was whackered down top to bottom, bottom to top, left to right and right to left to make sure the drive had a good solid base installed.

Charcoal blocks were then installed and concrete laid at 150-180mm, to conform to BS EN 206-1 and BS 8900-2.

Once the concrete had been given enough days to fully cure the driveway was hand trowelled with a mixture of Daltex Black and Daltex Silver aggregate bound in a UV resistant resin. This was laid at 18-20mm for vehicluar traffic.

To finish the blocks were then sealed to help repel water and maintain their colour.

The customer loves his new driveway and has had numerous neighbours and people passing ask for details.

The Beginning

Our customer wanted to increase the parking available at their property in Gunthorpe with Block Paving.

Work we carried out

The area was excavated to approximately 300mm and 200mm of hardcore was installed and whackered down both up/down and across the install area to give a good solid base.

Charcoal blocks were then laid on sand and finished with kiln dried said between the joins.

The area was then whackered again both up/down and across the entire area to give a good solid finish to the install.

The Beginning

Our customer was wanting to increasing parking space at their property in Cardea and had a front area of the house which was quite high maintenance with it being difficult to keep tidy.

Work we carried out

We removed all the shrubbery and loose stone and excavated so we could create a strong base for vehicular traffic.

The area was hardcore’d and a concrete base of 200mm was installed.

We decided to split the areas of resin to create a pathway and fabricate metal posts with chain linking to keep the area closed off.

As the customers wanted to use the area now and again to park a vehicle we made the first post removable so access to the drive was easy.

The area was finished in Daltex Silver and White Flint aggregate bound in UV resistant Resin.

The result is a modern front with next to maintenance that doubles up as extra parking as and when required.

We have already been asked by two neighbours to provide quotes for similar installs.

The Beginning

Our customer had a driveway that they wanted to extend to their boundary and also to a turfed area to increase the amount of parking space available.

Work we carried out

All shrubs, turf etc was removed and the previously laid driveway excavated.

The area was then hardcore’d before an installation of Autumn Mix blocks with a Red edging.

Our customer is over the moon with the final result which has greatly increased the space available for parking and with a much better base installed than the previous driveway the will stay looking great for years to come.

The Beginning

Our customer had slabs to the entrance of their property which had sunk and moved and also a driveway which had seen better days.

Work we carried out

All the slabs and existing driveway was removed and a new driveway extending to the previously slabbed area was installed in Marshalls 60mm Red Blocks with a contrasting Charcoal edging.

The Beginning

We were contacted by our client who wanted to extend the block paving area of their property to allow for extra parking.

Work we carried out

The current area was turfed, this was removed and the area hardcored and compacted.

The area was then block paved in “buff” blocks to match the rest of the driveway area.

The total install took just two days.